این تستر میتواند بصورت خودکار مقدار داده را بصورت دقیق بخواند و برای همین استفاده از آن بسیار آسان است و برای استفاده ی علاقه مندان به الکترونیک ، توسعه دهندگان الکترونیک، طراحان و تعمیر کاران الکترویک بسیار انتخاب مناسبی است.
میتواند هرنوعی از مقاومت ، خازن ، سلف ، دیود ، ترانزیستور ، SCR ، تیوپ تاثیر میدان MOS را اندازه گیری کند. میتواند نوع قطعه ، قطب ها ، خروجی پین HFE، ولتاژ درشولد و ظرفیت خازنی اتصال در تیوپ تاثیر میدان را تشخیص دهد. این به ویژه برای جفت ترانزیستور و شناسایی اجزای سطح هیبریدی مناسب است، و بهترین همکار برای سازندگان خلاق ولی آماتور است.
Specifications:
-160×128 TFT display
-Multi-function switch
-Transistor test field
-Zener diode test area
-IR receiver window
– Micro USB charging interface
-Charging indicator LED
1.1 Features
The TC-V2.12k is a TFT graphic display multifunctional tester.
L transistor tester
Automatic detection of Zener diode 0.01-30V
– Self-test with automatic calibration
L IR decoder
-Support Hitachi IR coding
-IR waveform display
-Infrared receiving instruction
L other
– Measurement results using TFT graphic display (160×128)
– One key operation
-Automatic shutdown (timeout adjustable)
– Built-in high capacity rechargeable li-ion battery
-Li-ion battery voltage detection -160×128 TFT display
-Multi-function switch
-Transistor test field
-Zener diode test area
-IR receiver window
– Micro USB charging interface
-Charging indicator LED
1.1 Features
The TC-V2.12k is a TFT graphic display multifunctional tester.
L transistor tester
Automatic detection of Zener diode 0.01-30V
– Self-test with automatic calibration
L IR decoder
-Support Hitachi IR coding
-IR waveform display
-Infrared receiving instruction
L other
– Measurement results using TFT graphic display (160×128)
– One key operation
-Automatic shutdown (timeout adjustable)
-Support Chinese and English
Warning : It is strictly prohibited to immerse the built-in li-ion battery, the tester in water or near a heat source!
Warning : For your personal safety, please strictly observe the specifications and precautions of the li-ion battery!
1 operating instructions
1.1 Key operational definitions
The multi-function switch has two actions:
L short press: press key and release switch within 1.5 seconds, not less than 10 ms
L long press: press for more than 1.5 seconds
1.2% power on
With the power off, short press the multifunction button, the tester turns on and is automatically measured.
L Power on and measurement interface
1.3 detect transistor
When the power is off or the test is complete, place the tester in the transistor test area of the test seat and press the lock handle, short press the multifunction key, the tester automatically measures the graphical display of the measurement results when the test is complete.
Warning : Always make sure Discharge capacitors before connecting them to the tester! The tester may be damaged before opening it!
Warning : We do not recommend using the tester to measure the battery! The battery voltage must be less than 4.5 v, otherwise the tester may be damaged!
